dMix 128 Quickstart Guide

Thank you for purchasing the Violet Audio dMix 128 mixer. To control your dMix 128 mixer, you will need to connect it to a device of your choice via a network (Ethernet) cable. You can control your mixer using any device (tablet, phone, laptop or computer) that has an HTML5 web browser without the need to download an app.

Startup

Power On: Connect your dMix 128 to mains power and turn on.

Check your network: Wait for the Blue Startup LED to stop flashing (about 30 seconds), indicating the dMix 128 mixer is ready.

Connect your external control device: Connect your device either directly to the dMix 128 Ethernet port or ensure that the dMix 128 and your remote control device are both connected to the same network via a router.

Open your browser: Launch a HTML5 enabled browser like Chrome, Safari, or Firefox.

Enter the dMix 128’s URL address: Type “dmix.local” into the address bar and press Enter.

Note: For multiple units you can change the default name.

Key Concepts

• No App Needed: You control the mixer directly through a HTML5 compatible web browser. Up to 20 remote devices can be connected simultaneously.
• Input Processing: Adjust Gain, EQ, dynamics, FX, and more directly from the interface.
• Mixer functions: AUX, MTX, DCA, and SUB group controls provided.
• Comprehensive Routing: Full control of I/O routing.
• Overviews: Mixer level and resource overviews available at a glance.
• Shows & Snapshots: Create new show files and save settings as snapshots for quick recall.
• View and MuteGroups: Organize channels for easier viewing and muting by creating custom channel layouts per connected device.
• Channel Customization: Channel presets, color coding, naming, copy/paste settings, and linking for stereo channels supported.
• Tools: RTA Analyser, white noise generator, and Oscillator provided.
• Operation Modes: Live and Soundcheck operation modes supported.
• Scalable Design: Additional units can be connected as your needs grow.
• Audio Interface: You can use your dMix 128 mixer as an audio interface. It is class compliant on Mac, meaning no additional driver software is required. However, if you’re a Windows PC user, then you must download and install its dedicated driver before connecting it to your computer. You can download the official drivers from the dmix 128 support page.

Important Safety Tip

Always start with monitors turned down and be cautious when learning new controls, as high volume levels can damage hearing.

Your mixer is ready, plug in your equipments and start mixing!!

Setup and Connections

Ensure the dMix 128 Mixer is connected to your device directly or via your Network.

Check the Violet Audio Youtube channel for video startup introduction here:

Youtube @violetaudioofficial

Setup your dMix 128 mixer input source signals. Connect your equipment to the hardware inputs, adjust the gain, EQ, and dynamics and update the routing.

Setup your dMix 128 mixer output signals. Connect your equipment to the hardware outputs.

Navigating Your Way Around the dMix 128

Adjust the Gain

Adjust the Gain using the Gain control fader accessible on the Gain tab page.

Phantom Power

For a condenser microphone, enable +48V via enabling the Phantom Power icon found at the top of each Gain fader on the Gain tab page. Remember to turn on phantom power after connecting the microphone and turn it off before disconnecting to prevent potentially damaging the microphone.

Turn up the channel Volume and Master faders

Turn up the Channel fader for your selected input and adjust the Master fader carefully to your desired output volume.

dMix 128 Firmware Updates

Violet Audio will periodically release firmware updates for the dMix 128. Firmware updates will often add to or improve the current feature set in addition to addressing any current bugs. You can update your dMix 128 firmware directly via the user interface when your network is connected to the internet.